ALCATEL-IND1-DOT1X-MIB DEFINITIONS ::= BEGIN

     	IMPORTS
		MODULE-IDENTITY,
		OBJECT-IDENTITY,
		OBJECT-TYPE,
		Integer32, IpAddress

			FROM SNMPv2-SMI
		DisplayString, MacAddress, TimeStamp, TEXTUAL-CONVENTION, TruthValue

			FROM SNMPv2-TC
		softentIND1Dot1X
			FROM ALCATEL-IND1-BASE
		MODULE-COMPLIANCE, OBJECT-GROUP
			FROM SNMPv2-CONF
		InterfaceIndex, InterfaceIndexOrZero
			FROM IF-MIB

		SnmpAdminString
			FROM SNMP-FRAMEWORK-MIB
		dot1xPaePortNumber
			FROM IEEE8021-PAE-MIB
			;

        alcatelIND1Dot1XMIB MODULE-IDENTITY
                LAST-UPDATED "201910070000Z"
                ORGANIZATION "ALE USA Inc"
                CONTACT-INFO
            "Please consult with Customer Service to ensure the most appropriate
             version of this document is used with the products in question:

                             Alcatel-Lucent Enterprise, 
                               26801 West Agoura Road
                            Agoura Hills, CA  91301-5122
                              United States Of America

            Telephone:               +1 800 995 2696 
 				     
            Electronic Mail:         ebg_global_supportcenter@al-enterprise.com 
            World Wide Web:          https://www.al-enterprise.com"
            

                DESCRIPTION
			"This module describes an authoritative enterprise-specific Simple
             Network Management Protocol (SNMP) Management Information Base (MIB):


                 The Port Access Entity module for managing 802.1X for
                 the OmniSwitch Product Line

             The right to make changes in specification and other information
             contained in this document without prior notice is reserved.

             No liability shall be assumed for any incidental, indirect, special, or
             consequential damages whatsoever arising from or related to this
             document or the information contained herein.

             Vendors, end-users, and other interested parties are granted
             non-exclusive license to use this specification in connection with
             management of the products for which it is intended to be used.
			
                         Copyright (C) ALE USA Inc. 2014-2019
                         Copyright (C) 1995-2013 Alcatel-Lucent
                             ALL RIGHTS RESERVED WORLDWIDE"


		REVISION      "201910070000Z"
                DESCRIPTION
                   "Updated the latest contact and Copyright information for ALE USA Inc."
                 ::= { softentIND1Dot1X 1}

alaIND1Dot1XMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For 802.1X
            Subsystem Managed Objects."
        ::= { alcatelIND1Dot1XMIB 1 }


    alaIND1Dot1XMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For 802.1X
            Subsystem Conformance Information."
        ::= { alcatelIND1Dot1XMIB 2 }


    alaIND1Dot1XMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For 802.1X
            Subsystem Units Of Conformance."
        ::= { alaIND1Dot1XMIBConformance 1 }

    ALADot1xClassificationPolicyType ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
               "This policy type is the classification policy used to classify
                a device onto the system. "
       SYNTAX  INTEGER {
                   dotXAuthentication          (0),
                   macAuthentication           (1),
                   groupMobilityRules          (2),
                   vlanId                      (3),
                   defaultVlan                 (4),
                   block                       (5),
                   internalUseOnlyA            (6),
                   internalUseOnlyB            (7),
                   internalUseOnlyC            (8),
                   captivePortalAuthentication (9),
                   captivePortalGroupMobility (10),
                   captivePortalDefaultVlan   (11),
                   captivePortalVlanId        (12),
                   captivePortalBlock         (13),
                   captivePortalUnknown       (14),
                   captivePortalUnpAuthSrv    (15),
                   captivePortalUnpUsrCfg     (16),
                   captivePortalUnpAAArule    (17),
                   authServerUNP              (18),
                   userConfigUNP              (19),
                   aaaRuleUNP                 (20),
                   aaaAuthSvrDownUNP          (21),
		   aaaAuthSvrDownBlock        (22),
		   aaaAuthSvrDownVpUnp        (29)
       }

       ALADot1xAuthenticationType ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
               "The type of authentication used"
       SYNTAX  INTEGER {
                   noAuthentication   (0),
                   dotXAuthentication (1),
                   macAuthentication  (2),
                   captivePortal      (3)
       }

      ALADot1xAuthenticationResult ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
               "The result of the authentication.  If the ALADot1xAuthenticationType of this
                 device is noAuthentication then this object will return notApplicable.  If the
                 authentication has not completed then this object will return inProgress."
       SYNTAX  INTEGER {
                   notApplicable (0),
                   inProgress    (1),
                   success       (2),
                   fail          (3)
       }

      ALADot1xMacLearntState ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
               "The state of MAC address in the system"
       SYNTAX  INTEGER {
                   bridging      (0), -- Normal access to the network.
                   filtering     (1), -- Access to the network blocked.
                   hicInProgress (2), -- Host Integrity Check in progress.
                   qmrInProgress (3)  -- QMR in progress.
       }

      ALADot1xMacQueryType ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
               "The query type of MAC address in the system.  This query MAC address type
                 is used to specify which type of MAC address to query from the
                  alaDot1xDeviceStatusTable."
       SYNTAX  INTEGER {
                   all           (0), -- All devices on the port.
                   supplicant    (1), -- All supplicants on the port.
                   nonSupplicant (2), -- All non-supplicant on the port.
                   captivePortal (3)  -- All devices on the port that used Captive Portal.
       }

      ALADot1xDeviceType ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
               "The type of device.  Either supplicant or non-supplicant."
       SYNTAX  INTEGER {
                   supplicant    (1),
                   nonSupplicant (2)
       }

  ALADot1xHicFlag ::= TEXTUAL-CONVENTION
	STATUS       current
	DESCRIPTION
	      " Flag to specify whether MAC is classified based on HIC "
	SYNTAX INTEGER {
		    enabled      (1),
		    disabled     (2)
	}



----------------------------------------------------------
---------- Logical Port table ----------------------------
----------------------------------------------------------
alaDot1xPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaDot1xPortEntry
    MAX-ACCESS  not-accessible
    STATUS      deprecated
    DESCRIPTION
        "A table of system level information for each port
        supported by the Port Access Entity.  An entry appears
        in this table for each port of this system."
    REFERENCE
        "9.6.1"
    ::= { alaIND1Dot1XMIBObjects 1 }

alaDot1xPortEntry OBJECT-TYPE
    SYNTAX      AlaDot1xPortEntry
    MAX-ACCESS  not-accessible
    STATUS      deprecated
    DESCRIPTION
        "TP DO: Add description here   "
    INDEX { dot1xPaePortNumber }
    ::= { alaDot1xPortTable 1 }


AlaDot1xPortEntry ::=
    SEQUENCE {
        alaDot1xPortSlotNumber
            INTEGER,
        alaDot1xPortPortNumber
            INTEGER,
        alaDot1xPortMACAddress
            MacAddress,
        alaDot1xPortVlan
            INTEGER,
        alaDot1xPortProtocol
            INTEGER,
        alaDot1xPortUserName
            DisplayString,
        alaDot1xPortState
            INTEGER,
	alaDot1xSupplicantPolicyUsed
	    ALADot1xClassificationPolicyType,
	alaDot1xAuthFailReason
	    DisplayString,
	alaDot1xReAuthCount
	    INTEGER,
	alaDot1xLastSuccessTime
	    DisplayString
        }

alaDot1xPortSlotNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..16)
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
        "The slot that the logical port represented by the dot1xPaePortNumber resides."
    ::= { alaDot1xPortEntry 1 }

alaDot1xPortPortNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..48)
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
        "The user port that the logical port represented by the dot1xPaePortNumber resides."
    ::= { alaDot1xPortEntry 2 }

alaDot1xPortMACAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
        "The MAC address of the supplicant that along with the slot and port uniquely
         form the logical port represented by the dot1xPaePortNumber."
    ::= { alaDot1xPortEntry 3 }

alaDot1xPortVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4096)
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
        "The vlan that the supplicant is authorized to access."
    ::= { alaDot1xPortEntry 4 }

alaDot1xPortProtocol OBJECT-TYPE
    SYNTAX      INTEGER (1..6)
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
        "The protocol that is authorized for the supplicant.  This is used in conjunction
         with the alaDot1xPortVlan object.  Supplicant can be authorized to different vlans
         for different protocol."
    ::= { alaDot1xPortEntry 5 }

alaDot1xPortUserName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
        "The user name of the supplicant used for authentication."
    ::= { alaDot1xPortEntry 6 }

alaDot1xPortState OBJECT-TYPE
    SYNTAX      INTEGER{
		   initialize (1),
		   disconnected (2),
		   connecting (3),
		   authenticating (4),
		   authenticated (5),
		   aborting (6),
		   held (7),
		   forceAuthenticated (8),
		   forceUnauthenticated (9),
		   authenticatedLocally (10)
		}
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
    	"The State of the port."
    ::= { alaDot1xPortEntry 7 }

alaDot1xSupplicantPolicyUsed  OBJECT-TYPE
    SYNTAX      ALADot1xClassificationPolicyType
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
        "Classification Policy under which the 802.1x supplicant is learned."
    ::= { alaDot1xPortEntry 8 }

alaDot1xAuthFailReason  OBJECT-TYPE
    SYNTAX      DisplayString 
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
	"Authentication Failure reasons for 802.1x supplicant client."
    ::= { alaDot1xPortEntry 9 }

alaDot1xReAuthCount  OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
	"Authentication Retry Count for 802.1x supplicant client."
    ::= { alaDot1xPortEntry 10 }

alaDot1xLastSuccessTime OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  not-accessible 
    STATUS      deprecated
    DESCRIPTION
	"Last successful time when client is authenticated."
    ::= { alaDot1xPortEntry 11 }

----------------------------------------------------------
----------Dot1x MAC table --------------------------------
----------------------------------------------------------

alaDot1xMacTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF AlaDot1xMacEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Provide the list of users currently authenticated into the
         switch for bridging purpose."
    ::= { alaIND1Dot1XMIBObjects 4 }

alaDot1xMacEntry OBJECT-TYPE
    SYNTAX        AlaDot1xMacEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
         "An entry in the AaaAuthenticatedUserTable."
    INDEX {alaDot1xMACAddress}
    ::= { alaDot1xMacTable 1 }

AlaDot1xMacEntry ::=
    SEQUENCE {
        alaDot1xMACAddress
            MacAddress,
        alaDot1xMacIfIndex
            InterfaceIndex,
        alaDot1xMacSlotNumber
            Integer32,
        alaDot1xMacPortNumber
            Integer32,
        alaDot1xMacVlan
            Integer32,
        alaDot1xMacProtocol
            Integer32,
        alaDot1xMacUserName
            DisplayString,
        alaDot1xMacState
            INTEGER,
        alaDot1xMacSupplicantPolicyUsed
            ALADot1xClassificationPolicyType,
        alaDot1xHicEnabledMAC
            ALADot1xHicFlag
        }

alaDot1xMACAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The MAC address of the supplicant that along with the slot and port uniquely
         form the logical port represented by the dot1xPaePortNumber."
    ::= { alaDot1xMacEntry 1 }

alaDot1xMacIfIndex  OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Interface index in which alaDot1xMACAddress was learned."
    ::= { alaDot1xMacEntry 2 }


alaDot1xMacSlotNumber OBJECT-TYPE
    SYNTAX      Integer32 (1..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The slot in which alaDot1xMACAddress was learned."
    ::= { alaDot1xMacEntry 3 }

alaDot1xMacPortNumber OBJECT-TYPE
    SYNTAX      Integer32 (1..48)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The user port in which alaDot1xMACAddress was learned."
    ::= { alaDot1xMacEntry 4 }

alaDot1xMacVlan OBJECT-TYPE
    SYNTAX      Integer32 (1..4096)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vlan that the supplicant is authorized to access."
    ::= { alaDot1xMacEntry 5 }

alaDot1xMacProtocol OBJECT-TYPE
    SYNTAX      Integer32 (1..6)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The protocol that is authorized for the supplicant.  This is used in conjunction
         with the alaDot1xMacVlan object.  Supplicant can be authorized to different vlans
         for different protocol."
    ::= { alaDot1xMacEntry 6 }

alaDot1xMacUserName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The user name of the supplicant used for authentication."
    ::= { alaDot1xMacEntry 7 }

alaDot1xMacState OBJECT-TYPE
    SYNTAX      INTEGER{
                   initialize (1),
                   disconnected (2),
                   connecting (3),
                   authenticating (4),
                   authenticated (5),
                   aborting (6),
                   held (7),
                   forceAuthenticated (8),
                   forceUnauthenticated (9),
                   authenticatedLocally (10)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The State of the port in which the current mac-address was learned."
    ::= { alaDot1xMacEntry 8 }

alaDot1xMacSupplicantPolicyUsed  OBJECT-TYPE
    SYNTAX      ALADot1xClassificationPolicyType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Classification Policy under which the 802.1x supplicant is learned."
    ::= { alaDot1xMacEntry 9 }

alaDot1xHicEnabledMAC OBJECT-TYPE
    SYNTAX       ALADot1xHicFlag
    MAX-ACCESS   read-only
    STATUS       deprecated
    DESCRIPTION
	"Flag to notify that MAC has been classified based on HIC policy"
 ::= { alaDot1xMacEntry 10 }
		


----------------------------------------------------------

----------------------------------------------------------
-------------- Reverse lookup table ----------------------
----------------------------------------------------------
alaDot1xPortLookupTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaDot1xPortLookupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of which allows to find the logical port number
        given the physical slot/port/MAC. An entry appears
        in this table for each logical port of this system."
    ::= { alaIND1Dot1XMIBObjects 2 }

alaDot1xPortLookupEntry OBJECT-TYPE
    SYNTAX      AlaDot1xPortLookupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The translation table to look up the dot1xPaePortNumber."
    INDEX { alaDot1xPortLookupSlotNumber,
     	    alaDot1xPortLookupPortNumber,
     	    alaDot1xPortLookupMACAddress }
    ::= { alaDot1xPortLookupTable 1 }

AlaDot1xPortLookupEntry ::=
    SEQUENCE {
        alaDot1xPortLookupSlotNumber
            INTEGER,
        alaDot1xPortLookupPortNumber
            INTEGER,
        alaDot1xPortLookupMACAddress
            MacAddress,
        alaDot1xPortLookupInterfaceNumber
            InterfaceIndex
        }

alaDot1xPortLookupSlotNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The slot that the logical port represented by the dot1xPaePortNumber resides."
    ::= { alaDot1xPortLookupEntry 1 }

alaDot1xPortLookupPortNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..48)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The physical port that the logical port represented by the dot1xPaePortNumber resides."
    ::= { alaDot1xPortLookupEntry 2 }

alaDot1xPortLookupMACAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC address of the supplicant that along with the slot and port uniquely
         form the logical port represented by the dot1xPaePortNumber."
    ::= { alaDot1xPortLookupEntry 3 }

alaDot1xPortLookupInterfaceNumber OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ifIndex that represnets the slot and port where the dot1xPaePortNumber resides."
    ::= { alaDot1xPortLookupEntry 4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Guest VLAN Configuration table - WILL NEVER BE SUPPORTED
-- but keep the OID reserved
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- alaDot1xGuestVlanConfTable OBJECT-TYPE
--	SYNTAX      SEQUENCE OF AlaDot1xGuestVlanConfEntry
--	MAX-ACCESS  not-accessible
--	STATUS      current
--	DESCRIPTION
--	"A table of guest vlan ID supported by the Port Access Entity.
--	An entry appears in this table for each port of this system."
-- ::= { alaIND1Dot1XMIBObjects 3 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Non 802.1x supplicant table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaDot1xNonSupplicantTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AlaDot1xNonSupplicantEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
        "A table of non 802.1x supplicants learned on 802.1x authenticated ports."
::= { alaIND1Dot1XMIBObjects 5 }

alaDot1xNonSupplicantEntry OBJECT-TYPE
        SYNTAX      AlaDot1xNonSupplicantEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
                "Non 802.1x supplicant information."
        INDEX { alaDot1xNonSupplicantIntfNum,
                alaDot1xNonSupplicantMACAddress }
::= { alaDot1xNonSupplicantTable 1 }


AlaDot1xNonSupplicantEntry ::=
        SEQUENCE {
                alaDot1xNonSupplicantIntfNum    InterfaceIndex,
                alaDot1xNonSupplicantMACAddress MacAddress,
                alaDot1xNonSupplicantVlanID     INTEGER,
		alaDot1xNonSupplicantPolicyUsed ALADot1xClassificationPolicyType,
                alaDot1xAuthenticationStatus    INTEGER,
		alaDot1xNonSupplicantHicEnabledMAC ALADot1xHicFlag,
		alaDot1xNonSupplicantUserName   DisplayString
                }

alaDot1xNonSupplicantIntfNum OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The ifIndex represneting the slot and port where the non 802.1x supplicant is learned."
    ::= { alaDot1xNonSupplicantEntry 1 }

alaDot1xNonSupplicantMACAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC address of the non 802.1x supplicant."
    ::= { alaDot1xNonSupplicantEntry 2 }

alaDot1xNonSupplicantVlanID OBJECT-TYPE
        SYNTAX      INTEGER (1..4096)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
        "The Id of the VLAN on which the non 802.1x supplicant is learned."
    ::= { alaDot1xNonSupplicantEntry 3 }

alaDot1xNonSupplicantPolicyUsed  OBJECT-TYPE
        SYNTAX      ALADot1xClassificationPolicyType
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
        "Classification policy under which the non 802.1x supplicant is learned."
    ::= { alaDot1xNonSupplicantEntry 4 }

alaDot1xAuthenticationStatus  OBJECT-TYPE
        SYNTAX  INTEGER {
                idle (1),
		inProgress (2),
                authenticated (3),
		failed (4),
		failedTimeout (5),
		failedNoServer (6),
		failedNoResources (7)
            }

        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
        "Authentication status of the non 802.1x supplicant."
    ::= { alaDot1xNonSupplicantEntry 5 }

alaDot1xNonSupplicantHicEnabledMAC OBJECT-TYPE
	SYNTAX      ALADot1xHicFlag
	MAX-ACCESS  read-only
        STATUS      current
	DESCRIPTION
	"Flag to specify whether non supplicant is classified based on HIC."
   ::= { alaDot1xNonSupplicantEntry  6 }

alaDot1xNonSupplicantUserName OBJECT-TYPE	 
SYNTAX      DisplayString	 
MAX-ACCESS  read-only	 
STATUS      current	 
DESCRIPTION	 
"The user name of the non-supplicant used for authentication."	 
::= { alaDot1xNonSupplicantEntry 7 }

-- alaDot1xNonSuppPolicy
-- alaDot1xSuppPolicy

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Authentication Policy Configuration table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaDot1xAuthPolicyTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF AlaDot1xAuthPolicyEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
	"A table of supplicant and non supplicant device classification policies
	as they are configured on 802.1x authenticated ports."
::= { alaIND1Dot1XMIBObjects 6 }

alaDot1xAuthPolicyEntry OBJECT-TYPE
	SYNTAX      AlaDot1xAuthPolicyEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION
		"Device classification policies information."
	INDEX { alaDot1xAuthPolicyIntfNumber }
::= { alaDot1xAuthPolicyTable 1 }


AlaDot1xAuthPolicyEntry ::=
	SEQUENCE {
		alaDot1xAuthPolicyIntfNumber 	InterfaceIndex,
		alaDot1xNonSuppPolicy     	DisplayString,
		alaDot1xSuppPolicy        	DisplayString,
                alaDot1xPollingCnt        	Integer32,
		alaDot1xCaptivePortalPolicy    	DisplayString,
                alaDot1xCPortalSessionLimit    	Integer32,
                alaDot1xCPortalRetryCnt        	Integer32,
                alaDot1xSupplicantBypass        INTEGER,
                alaDot1xSBAllowEAP	        INTEGER,
                alaDot1xCPortalInactivityLogout INTEGER,
  		alaDot1xNonSuppSessTimeoutStatus INTEGER,
		alaDot1xNonSuppSessTimeoutIntrvl Integer32,
		alaDot1xNonSuppSessTimeoutTrustRadStatus INTEGER,
		alaDot1xSuppTrustRadiusEnabled INTEGER,
        	alaDot1xNonSupInactivityLogout INTEGER,
		alaDot1xPerPortAPModeStatus     INTEGER,
                alaDot1xPerPortForceL3Learning  INTEGER,
                alaDot1xPerPortForceL3LearningPortBounce INTEGER
	}
alaDot1xAuthPolicyIntfNumber OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ifIndex that represnets the slot and port where the device classification
        policies are configured."
    ::= { alaDot1xAuthPolicyEntry 1 }

alaDot1xNonSuppPolicy OBJECT-TYPE
     	SYNTAX     DisplayString (SIZE (0..127))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION	
 	"MAC based authentication 	-> M
 	 Group Mobility			-> G
 	 VLAN ID			-> <vlan id>
 	 Default VLAN			-> D
 	 Block				-> B
	 Fail				-> ,
	 Captive Portal			-> C
         UNP                            -> '<String>'

 	 Examples: MGD,GB. The default value is B (block).  If the string size is zero (0), the
         default value is used."
    ::= { alaDot1xAuthPolicyEntry 2 }

alaDot1xSuppPolicy OBJECT-TYPE
     	SYNTAX     DisplayString (SIZE (0..127))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
 	"802.1x authentication  	-> X
 	 Group Mobility			-> G
 	 VLAN ID			-> <vlan id>
 	 Default VLAN			-> D
 	 Block				-> B
	 Fail				-> ,
	 Captive Portal			-> C
         Mac-authentication             -> F
         UNP                            -> '<String>'

 	 Default value: XGD,B.  If the string size is zero (0), the default value is used."
    ::= { alaDot1xAuthPolicyEntry 3 }

alaDot1xPollingCnt OBJECT-TYPE
	SYNTAX      Integer32 (0..99)
	MAX-ACCESS  read-write
	STATUS      current
        DESCRIPTION
        	"Number of retries to poll the end station for EAPoL frame before
        	classifying the end station with group mobility or guest vlan ID configured.
                If the value is set to zero (0), it indicates a special case where the port will
                ignore any EAP frame from the client and this will force all devices to the
                non-supplicant policy for classification."
    ::= { alaDot1xAuthPolicyEntry 4 }

alaDot1xCaptivePortalPolicy OBJECT-TYPE
     	SYNTAX     DisplayString (SIZE (0..127))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
 	"Web authentication 		-> W
 	 Group Mobility			-> G
 	 VLAN ID			-> <vlan id>
 	 Default VLAN			-> D
 	 Block				-> B
	 Fail				-> ,

 	 Default value: XGD,B, if string size is zero, the default value is used."
    ::= { alaDot1xAuthPolicyEntry 5 }

alaDot1xCPortalSessionLimit OBJECT-TYPE
	SYNTAX      Integer32 (0..999)
	MAX-ACCESS  read-write
	STATUS      current
        DESCRIPTION
        	"Captive Portal Session limit is the interval that a Captive Portal user can login.
                 User is to be logged off after the session limit. If the session limit is set to
                 zero (0), it means the session is unlimited, user will not be automatically logged off."
    ::= { alaDot1xAuthPolicyEntry 6 }

alaDot1xCPortalRetryCnt OBJECT-TYPE
	SYNTAX      Integer32 (0..999)
	MAX-ACCESS  read-write
	STATUS      current
        DESCRIPTION
        	"Number of retries for the Captive Portal user to provide the user
                 credential before the software will classify the user to the failed
                 policy according the the alaDot1xCaptivePortalPolicy."
    ::= { alaDot1xAuthPolicyEntry 7 }

alaDot1xSupplicantBypass OBJECT-TYPE
        SYNTAX    INTEGER {
		  enable (1),
		  disable(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                "Supplicant Bypass configuration Status."
        DEFVAL { disable }
    ::= { alaDot1xAuthPolicyEntry 8 }

alaDot1xSBAllowEAP OBJECT-TYPE
        SYNTAX INTEGER {
                 pass   (1),
                 fail   (2),
                 noauth (3),
                 none   (4)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                "Supplicant Bypass Allow EAP configuration."
        DEFVAL { none }
    ::= { alaDot1xAuthPolicyEntry 9 }

alaDot1xCPortalInactivityLogout OBJECT-TYPE
        SYNTAX  INTEGER {
        	enable (1),
       		disable (2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                "Captive portal inactivity logout entry."
        DEFVAL { disable }
    ::= { alaDot1xAuthPolicyEntry 10 }

alaDot1xNonSuppSessTimeoutStatus OBJECT-TYPE         	 
      SYNTAX INTEGER {         	 
                  enable(1),         	 
                  disable(2)         	 
                  }         	 
      MAX-ACCESS read-write         	 
      STATUS current         	 
      DESCRIPTION         	 
          "Session Timeout Status for MAC users."	 
      DEFVAL { disable }         	 
     ::= { alaDot1xAuthPolicyEntry 11 }         	 
          	 
alaDot1xNonSuppSessTimeoutIntrvl OBJECT-TYPE         	 
      SYNTAX Integer32         	 
      MAX-ACCESS read-write         	 
      STATUS current         	 
      DESCRIPTION         	 
          "Session Timeout Status Interval for MAC users." 	 
      DEFVAL { 43200 }         	 
     ::= { alaDot1xAuthPolicyEntry 12 }          	 
          	 
alaDot1xNonSuppSessTimeoutTrustRadStatus OBJECT-TYPE         	 
      SYNTAX INTEGER {         	 
                  enable(1),         	 
                  disable(2)         	 
                  }         	 
      MAX-ACCESS read-write         	 
      STATUS current         	 
      DESCRIPTION         	 
          "Session Timeout Radius Status for Mac based authenticated users." 	 
      DEFVAL { disable }         	 
     ::= { alaDot1xAuthPolicyEntry 13 }	 
	 
alaDot1xSuppTrustRadiusEnabled OBJECT-TYPE         	 
 SYNTAX  INTEGER {         	 
         enable (1),         	 
         disable (2)         	 
 }         	 
 MAX-ACCESS  read-write         	 
 STATUS      current         	 
 DESCRIPTION         	 
 "Enable/disable control to take the session timeout from the server"         	 
 DEFVAL { disable }         	 
 ::= { alaDot1xAuthPolicyEntry 14 }

alaDot1xNonSupInactivityLogout OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mac Aging Timeout for non suplicant"
DEFVAL { enable }
::= { alaDot1xAuthPolicyEntry 15 }

alaDot1xPerPortAPModeStatus OBJECT-TYPE
	SYNTAX INTEGER {
		enable(1),
		disable(2)
		}
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION
	    "This object is to enable or disable AP-mode on per port basis."
	::= { alaDot1xAuthPolicyEntry 16 }

alaDot1xPerPortForceL3Learning  OBJECT-TYPE
        SYNTAX     INTEGER {
                    enable (1),
                    disable (2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "UNP force L3 learning status."
        ::= { alaDot1xAuthPolicyEntry 17 }

alaDot1xPerPortForceL3LearningPortBounce OBJECT-TYPE
        SYNTAX     INTEGER {
                    enable (1),
                    disable (2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "Port-Bounce associated with UNP force L3 learning status."
        ::= { alaDot1xAuthPolicyEntry 18 }

alaDot1xCportalConfig    OBJECT IDENTIFIER ::= { alaIND1Dot1XMIBObjects 7 }

alaDot1xCPortalIpAddress OBJECT-TYPE
        SYNTAX IpAddress
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
                "The factory default Captive Portal IP address is 10.123.0.1.
                 If the 10.123.0.0 subnet is already in use, user can change
                 the Captive Portal IP address to another 10.x.0.0 subnet.
                 Only the second octet of the Captive Portal IP address can
                 be changed."
        ::= { alaDot1xCportalConfig 1 }

alaDot1xCPortalProxyURL  OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (0..64))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                 "The factory default for Captive Portal working with proxy
                  server url has the key word proxy.  If the user's proxy
                  server url does not have the key work proxy, user can use
                  this object to specify the proxy server url.  If none is specified
                  this object will return the default value - proxy."
       ::= { alaDot1xCportalConfig 2 }

alaDot1xCPortalPostAuthSuccessRedirectURL  OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (0..63))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                 "Captive Portal's Redirect URL upon successful authentication."
       ::= { alaDot1xCportalConfig 3 }

alaDot1xCPortalPostAuthFailRedirectURL  OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (0..63))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                 "Captive Portal's Redirect URL upon failed authentication."
       ::= { alaDot1xCportalConfig 4 }

alaDot1xCPortalDNSKeyword1  OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (0..63))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                 "Captive Portal's DNS keyword string."
       ::= { alaDot1xCportalConfig 5 }

alaDot1xCPortalDNSKeyword2  OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (0..63))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                 "Captive Portal's DNS keyword string."
       ::= { alaDot1xCportalConfig 6 }

alaDot1xCPortalDNSKeyword3  OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (0..63))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                 "Captive Portal's DNS keyword string."
       ::= { alaDot1xCportalConfig 7 }

alaDot1xCPortalDNSKeyword4  OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (0..63))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                 "Captive Portal's DNS keyword string."
       ::= { alaDot1xCportalConfig 8 }

alaDot1xCPortalProxyPort  OBJECT-TYPE
        SYNTAX  Integer32  (1..65535 )
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
    	             "Captive Portal's user defined proxy port number."
    		   ::= { alaDot1xCportalConfig 9 }

alaDot1xCPortalRedirectString  OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (0..63))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                     "Captive Portal redirect url key string."
                   ::= { alaDot1xCportalConfig 10 }



----------------------------------------------------------
---------- Device Status Table ----------------------------
----------------------------------------------------------
alaDot1xDeviceStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AlaDot1xDeviceStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table of system level information for each port
        supported by the Port Access Entity.  An entry appears
        in this table for each port of this system."
    ::= { alaIND1Dot1XMIBObjects 8 }

alaDot1xDeviceStatusEntry OBJECT-TYPE
    SYNTAX      AlaDot1xDeviceStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "One entry of the Device Status Table.   "
    INDEX { alaDot1xDeviceStatusMacQueryType,
            alaDot1xDeviceStatusSlotNumber,
            alaDot1xDeviceStatusPortNumber,
            alaDot1xDeviceStatusMACAddress,
            alaDot1xDeviceStatusDeviceType }
    ::= { alaDot1xDeviceStatusTable 1 }


AlaDot1xDeviceStatusEntry ::=
    SEQUENCE {
        alaDot1xDeviceStatusMacQueryType
            ALADot1xMacQueryType,
        alaDot1xDeviceStatusSlotNumber
            INTEGER,
        alaDot1xDeviceStatusPortNumber
            INTEGER,
        alaDot1xDeviceStatusMACAddress
            MacAddress,
        alaDot1xDeviceStatusDeviceType
            ALADot1xDeviceType,
        alaDot1xDeviceStatusVlan
            INTEGER,
        alaDot1xDeviceStatusIPAddress
            IpAddress,
        alaDot1xDeviceStatusUserName
            SnmpAdminString,
        alaDot1xDeviceStatusProfileUsed
            SnmpAdminString,
        alaDot1xDeviceStatusAuthType
            ALADot1xAuthenticationType,
        alaDot1xDeviceStatusPolicyUsed
            ALADot1xClassificationPolicyType,
        alaDot1xDeviceStatusAuthResult
            ALADot1xAuthenticationResult,
        alaDot1xDeviceStatusMacLearntState
            ALADot1xMacLearntState,
        alaDot1xDeviceStatusTimeLearned
            TimeStamp,
        alaDot1xDeviceStatusCaptivePortalUsed
            TruthValue,
	 alaDot1xDeviceStatusHicResult
	    Integer32
        }

alaDot1xDeviceStatusMacQueryType OBJECT-TYPE
    SYNTAX      ALADot1xMacQueryType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The type of MAC address to query."
    ::= { alaDot1xDeviceStatusEntry 1 }

alaDot1xDeviceStatusSlotNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..16)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The slot that the device reporting the status resides."
    ::= { alaDot1xDeviceStatusEntry 2 }

alaDot1xDeviceStatusPortNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..48)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The user port that the device reporting the status resides."
    ::= { alaDot1xDeviceStatusEntry 3 }

alaDot1xDeviceStatusMACAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC address of the device reporting the status."
    ::= { alaDot1xDeviceStatusEntry 4 }

alaDot1xDeviceStatusDeviceType OBJECT-TYPE
    SYNTAX      ALADot1xDeviceType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The type of device.  Either supplicant or non-supplicant."
    ::= { alaDot1xDeviceStatusEntry 5 }

alaDot1xDeviceStatusVlan OBJECT-TYPE
    SYNTAX      INTEGER (1..4096)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The vlan that the device reporting the status is authorized to access."
    ::= { alaDot1xDeviceStatusEntry 6 }

alaDot1xDeviceStatusIPAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP address of the device reporting the status."
    ::= { alaDot1xDeviceStatusEntry 7 }

alaDot1xDeviceStatusUserName OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The user name of the device reporting the status."
    ::= { alaDot1xDeviceStatusEntry 8 }

alaDot1xDeviceStatusProfileUsed OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The name of the User Network Profile entry used when the
         device reporting the status is classified."
    ::= { alaDot1xDeviceStatusEntry 9 }

alaDot1xDeviceStatusAuthType  OBJECT-TYPE
    SYNTAX      ALADot1xAuthenticationType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The type of authentication used by the device reporting
         the status to obtain network access."
    ::= { alaDot1xDeviceStatusEntry 10 }

alaDot1xDeviceStatusPolicyUsed  OBJECT-TYPE
    SYNTAX      ALADot1xClassificationPolicyType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Classification Policy under which the device is learned."
    ::= { alaDot1xDeviceStatusEntry 11 }

alaDot1xDeviceStatusAuthResult OBJECT-TYPE
    SYNTAX      ALADot1xAuthenticationResult
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    	"The State of the port."
    ::= { alaDot1xDeviceStatusEntry 12 }

alaDot1xDeviceStatusMacLearntState OBJECT-TYPE
    SYNTAX      ALADot1xMacLearntState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
    	"The State of the MAC classified in the switch."
    ::= { alaDot1xDeviceStatusEntry 13 }

alaDot1xDeviceStatusTimeLearned  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The time that the MAC address is learned in the system."
    ::= { alaDot1xDeviceStatusEntry 14 }

alaDot1xDeviceStatusCaptivePortalUsed OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The object indicates if the device is classified in the system using
         Captive Portal. A value of True means that the device has used Captive Portal
         to authenticate its credential and a value of False means that the device
         has not used Captive Portal to authenticate its credential."
    ::= { alaDot1xDeviceStatusEntry 15 }

alaDot1xDeviceStatusHicResult OBJECT-TYPE
    SYNTAX      Integer32( 0 .. 9 )
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Hic result of the device reporting the status is authorized to access. Default value is 0, indicates HIC process has not started"
    DEFVAL { 0 }

    ::= { alaDot1xDeviceStatusEntry 16 }


alaDot1xAdminLogoutParams    OBJECT IDENTIFIER ::= { alaIND1Dot1XMIBObjects 9 }

--
--    ala Dot1x Admin Logout Parameters group
--

   alaDot1xAdminLogoutType OBJECT-TYPE
       SYNTAX   INTEGER {
                  noOperation        (0),
                  macAddress         (1),
                  username           (2),
                  networkProfileName (3),
                  interfaceId        (4)
                }
       MAX-ACCESS    read-write
       STATUS        current
       DESCRIPTION
           "When this variable is set, the switch is to logout the user based on the
            logout type.  The associated MIB object should be correctly set
            based on the logout type.  If the corresponding MIB object that contain the
            criteria is not set correctly the switch will not be able to perform the
            logout operation.  After the logout operation is done, the switch will set
            the corresponding criteria to back to its default value.  Also when the
            logout operation is done, the switch is to set this variable back to zero (0)."
       ::= { alaDot1xAdminLogoutParams    1}

   alaDot1xAdminLogoutMacAddress OBJECT-TYPE
       SYNTAX        MacAddress
       MAX-ACCESS    read-write
       STATUS        current
       DESCRIPTION
           "This value is used only if alaDot1xAdminLogoutType is set to MAC address.
            The default value is set to ff:ff:ff:ff:ff:ff.  This well know broadcast MAC
            address will not be learned by the switch.  The switch will reset this to the
            default value after the logout operation is performed"
       ::= { alaDot1xAdminLogoutParams    2}

   alaDot1xAdminLogoutUserName OBJECT-TYPE
       SYNTAX        SnmpAdminString (SIZE(0..32))
       MAX-ACCESS    read-write
       STATUS        current
       DESCRIPTION
           "This value is used only if alaDot1xAdminLogoutType is set to username.
            The default is a NULL string.  The switch will reset this to the default value
            after the logout operation is performed.  User is not allowed to set the value
            to NULL."
       ::= { alaDot1xAdminLogoutParams    3}

   alaDot1xAdminLogoutNetworkProfileName OBJECT-TYPE
       SYNTAX        SnmpAdminString (SIZE(0..32))
       MAX-ACCESS    read-write
       STATUS        current
       DESCRIPTION
           "This value is used only if alaDot1xAdminLogoutType is set to networkprofilename.
            The default is a NULL string.  The switch will reset this to the default value
            after the logout operation is performed.  User is not allowed to set the value
            to NULL."
       ::= { alaDot1xAdminLogoutParams    4}

   alaDot1xAdminLogoutInterfaceId OBJECT-TYPE
       SYNTAX        InterfaceIndexOrZero
       MAX-ACCESS    read-write
       STATUS        current
       DESCRIPTION
           "This value is used only if alaDot1xAdminLogoutType is set to interfaceId.
            The default value is zero (0).  The switch will reset this to the default value
            after the logout operation is performed."
       ::= { alaDot1xAdminLogoutParams    5}

alaDot1xAuthServerTimeout    OBJECT IDENTIFIER ::= { alaIND1Dot1XMIBObjects 10 }

alaDot1xAuthSvrTimeoutPolicy OBJECT-TYPE
     	SYNTAX     DisplayString (SIZE (0..127))
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
 	 "Block				-> B
	  User Network Profile 		-> 'user network profile name'

 	  Default value is B."
    ::= { alaDot1xAuthServerTimeout 1 }

alaDot1xAuthSvrTimeoutReAuthPeriod OBJECT-TYPE
        SYNTAX      Integer32 (30..43200)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                "This is the time interval in second that the supplicant is to be
                 classified according to the Auth Server Down Policy
                 (alaDot1xAuthServerTimeoutPolicy).  When this time is expired,
                 the supplicant will be prompted to re-authenticate and see if
                 the Auth Server is back up.  The default value is 30 seconds."
    ::= { alaDot1xAuthServerTimeout 2 }

alaDot1xAuthSvrTimeoutStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled (1),
                disabled(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "This object is to enable or disable the use of alaDot1xAuthSvrTimeoutPolicy,
               alaDot1xAuthSvrTimeoutVoicePolicy and alaDot1xAuthSvrTimeoutReAuthPeriod.  Default is disabled."
        DEFVAL { disabled }
    ::= { alaDot1xAuthServerTimeout 3 }

alaDot1xAuthSvrTimeoutVoicePolicy OBJECT-TYPE

        SYNTAX     DisplayString (SIZE (0..127))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
         "None                          -> None
          User Network Profile          -> 'user network profile name'
          Default value is None."
    ::= { alaDot1xAuthServerTimeout 4 }

alaDot1xAuthSvrPollingStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled (1),
                disabled(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "This is object is to enable or disable the radius server polling feature. Default is disabled."
        DEFVAL { disabled }
    ::= { alaDot1xAuthServerTimeout 5 }

alaDot1xAuthSvrDownMacPersistency OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled (1),
                disabled(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "This is the object to enable or disable the functionality to stop flushing SL context of the mac when
               an Eap Start is received when the auth server down is enabled  and  the server is still unreachable and if 
               the client again claassifies in the same vlan and classification policy.In the normal case,server becomes reachable ,
               delete the entire context and add.Default is disabled." 
        DEFVAL { disabled }
    ::= { alaDot1xAuthServerTimeout 6 } 

 alaDot1xDelayLearningPeriod OBJECT-TYPE
         SYNTAX      Integer32 
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION
                 "This is the time interval in seconds that is sent to all NIs
                  for delaying authentication process after reboot.
                  The default value is 120 seconds."
     ::= { alaDot1xAuthServerTimeout 7 }

 alaDot1xAPModeStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		enabled (1),
		disabled(2)
		}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
	    "This object is to enable or disable AP-mode globally in switch. Default is Enabled"
	DEFVAL { enabled }
	::= { alaDot1xAuthServerTimeout 8 }

 alaDot1xEAPVersionStatus OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled (1),
                disabled(2)
                }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "This object is to enable or disable eap-version3 globally in switch. Default is Disabled"
        DEFVAL { disabled }
        ::= { alaDot1xAuthServerTimeout 9 }

 alaDot1xForceL3Learning  OBJECT-TYPE
        SYNTAX  INTEGER {
                enable (1),
                disable (2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "UNP force L3 learning status."
        ::= { alaDot1xAuthServerTimeout 10 }

 alaDot1xForceL3LearningPortBounce OBJECT-TYPE
        SYNTAX  INTEGER {    
                enable (1),
                disable (2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "Port-Bounce associated with UNP force L3 learning status."
        ::= { alaDot1xAuthServerTimeout 11 }

 ----------------------------------------------------------
 ---------- Passthrough Mode Status Table -----------------
 ----------------------------------------------------------

 AlaPassThroughStatus ::= TEXTUAL-CONVENTION
        STATUS     current
        DESCRIPTION
             " Admin status"
        SYNTAX  INTEGER { enabled(1),
                          disabled(2)
                         }

 alaPassthroughConfig    OBJECT IDENTIFIER ::= { alaIND1Dot1XMIBObjects 11 }

 alaDot1xPassthroughStatus  OBJECT-TYPE
         SYNTAX       AlaPassThroughStatus
         MAX-ACCESS  read-write
         STATUS     current
         DESCRIPTION
                  "Passthrough of 802.1x packets.
                   Force the 802.1x packet to flood in the VLAN."
        ::= { alaPassthroughConfig 1 }

 alaAvlanPassthroughStatus  OBJECT-TYPE
         SYNTAX      AlaPassThroughStatus
         MAX-ACCESS  read-write
         STATUS     current
         DESCRIPTION
                  "Passthrough of AVLAN packets.
                   Force the AVLAN packet to flood in the VLAN."
        ::= { alaPassthroughConfig 2 }

alaCportalPassthroughStatus  OBJECT-TYPE
        SYNTAX      AlaPassThroughStatus
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                 "Passthrough of CAPITIVE packets.
                  Force the AVLAN packet to flood in the VLAN."
       ::= { alaPassthroughConfig 3 }
 
----------------------------------------------------------
----------Kerberos Port table --------------------------------
----------------------------------------------------------
 
alaKerberosPortTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF AlaKerberosPortEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A table of 802.1x ports which are configured as
        Kerberos enabled/disabled ports."
    ::= { alaIND1Dot1XMIBObjects 12 }
 
alaKerberosPortEntry OBJECT-TYPE
    SYNTAX        AlaKerberosPortEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
         "Kerberos Port Information."
    INDEX {alaKerberosPortIfIndex}
    ::= { alaKerberosPortTable 1 }
AlaKerberosPortEntry ::=
    SEQUENCE {
        alaKerberosPortIfIndex
            InterfaceIndex,
        alaKerberosPortStatus
            INTEGER
        }
 
 
alaKerberosPortIfIndex  OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Interface index of the port on which Kerberos is configured."
    ::= { alaKerberosPortEntry 1 }
 
 
alaKerberosPortStatus  OBJECT-TYPE
    SYNTAX      INTEGER {
                enable (1),
                disable(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Kerberos status on Port."
    DEFVAL { disable }
    ::= { alaKerberosPortEntry 2 }

 --    Current Rate Limit Table On Dot1x Port MIB
 
     alaDot1xCrlUnpTable OBJECT-TYPE
         SYNTAX        SEQUENCE OF AlaDot1xCrlUnpEntry
         MAX-ACCESS    not-accessible
         STATUS        current
         DESCRIPTION
             "Current Rate Limit Table On 8021x Port"
         ::= { alaIND1Dot1XMIBObjects 13 }
 
  alaDot1xCrlUnpEntry OBJECT-TYPE
        SYNTAX        AlaDot1xCrlUnpEntry
        MAX-ACCESS    not-accessible
        STATUS        current
        DESCRIPTION
            "Current Rate Limit Table entry on a 8021X port."
        INDEX {alaDot1xCrlIfIndex }
        ::= { alaDot1xCrlUnpTable 1 }

  AlaDot1xCrlUnpEntry ::= SEQUENCE
        {
            alaDot1xCrlIfIndex 	         InterfaceIndex,
            alaDot1xCrlIngBw              Integer32,
            alaDot1xCrlEgrBw              Integer32,
            alaDot1xCrlIngTypeFlag        INTEGER,
            alaDot1xCrlEgrTypeFlag        INTEGER,
            alaDot1xCrlDefDepth           Integer32,
            alaDot1xCrlIngProfile         SnmpAdminString,
            alaDot1xCrlEgrProfile         SnmpAdminString
        }

  alaDot1xCrlIfIndex OBJECT-TYPE
  SYNTAX      InterfaceIndex 
  MAX-ACCESS  not-accessible 
  STATUS      current
  DESCRIPTION
       "The ifIndex of the port."
      ::= { alaDot1xCrlUnpEntry 1 }

  alaDot1xCrlIngBw  OBJECT-TYPE
          SYNTAX      Integer32 (-1 .. 10485760)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                   "Current Ingress BW active on 8021x Port in Kbps.
                    Default value is -1 which means no Ingress Bandwidth exist on port."
         DEFVAL        { -1 }
         ::= { alaDot1xCrlUnpEntry 2 }

  alaDot1xCrlEgrBw  OBJECT-TYPE
          SYNTAX      Integer32 (-1 .. 10485760)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                   "Current Egress BW active on 8021x Port in Kbps.
                    Default value is -1 which means no Egress Bandwidth exist on port."
         DEFVAL        { -1 }
         ::= { alaDot1xCrlUnpEntry 3 }

  alaDot1xCrlIngTypeFlag  OBJECT-TYPE
          SYNTAX      INTEGER
                {
                        notapplicable(0),
                        unp(1),
                        qos(2)
                }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                   "Application responsible for setting Ingress BW on port.
                    Default is - which means no application has set BW on port."
         DEFVAL        { 0 }
         ::= { alaDot1xCrlUnpEntry 4 }

  alaDot1xCrlEgrTypeFlag  OBJECT-TYPE
          SYNTAX      INTEGER
                {
                        notapplicable(0),
                        unp(1),
                        qos(2)
                }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                   "Application responsible for setting Egress BW on port.
                    Default is - which means no application has set BW on port."
		    DEFVAL        { 0 }
         ::= { alaDot1xCrlUnpEntry 5 }

  alaDot1xCrlDefDepth  OBJECT-TYPE
          SYNTAX      Integer32 (-1 .. 131072)
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                   "Latest Default Depth applied on port.
                    Default depth is -1 which means no depth is configured. BW is programmed with default optimal depth."
         DEFVAL        { -1 }
         ::= { alaDot1xCrlUnpEntry 6 }

  alaDot1xCrlIngProfile  OBJECT-TYPE
          SYNTAX      SnmpAdminString ( SIZE( 1 .. 32 ) )
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                   "The name of the UNP Profile Name responsible for setting current Ingress
                   Bandwidth limitation on port. Applicable only if current bandwidth set is
                   due to UNP classification on port."
         ::= { alaDot1xCrlUnpEntry 7 }

  alaDot1xCrlEgrProfile  OBJECT-TYPE
          SYNTAX      SnmpAdminString ( SIZE( 1 .. 32 ) )
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION
                   "The name of the UNP Profile Name responsible for setting current Egress
                   Bandwidth limitation on port. Applicable only if current bandwidth set is
                   due to UNP classification on port"
         ::= { alaDot1xCrlUnpEntry 8 }

--  BYOD Host and UNP Status
 alaRedirectByodHostTable  OBJECT-TYPE
 SYNTAX                 SEQUENCE OF AlaRedirectByodHostEntry
 MAX-ACCESS             not-accessible
 STATUS                 current
 DESCRIPTION
   "This table shows list of BYOD Hosts and their progress status."
 ::= { alaIND1Dot1XMIBObjects 14 }

 alaRedirectByodHostEntry  OBJECT-TYPE
 SYNTAX                 AlaRedirectByodHostEntry
 MAX-ACCESS             not-accessible
 STATUS                 current
 DESCRIPTION
  "BYOD Hosts status information."
 INDEX { alaByodHostStateQueryType,
         alaByodHostStateSlotNumber,
         alaByodHostStatePortNumber,
         alaByodHostStateMacAddress,
         alaByodHostStateDeviceType }
 ::= { alaRedirectByodHostTable 1 }

 AlaRedirectByodHostEntry ::= SEQUENCE
 {
   alaByodHostStateQueryType ALADot1xMacQueryType,
   alaByodHostStateSlotNumber Integer32,
   alaByodHostStatePortNumber Integer32,
   alaByodHostStateMacAddress MacAddress,
   alaByodHostStateDeviceType ALADot1xDeviceType,
   alaByodHostProgressStatus  SnmpAdminString
 }

 alaByodHostStateQueryType OBJECT-TYPE
 SYNTAX                    ALADot1xMacQueryType
 MAX-ACCESS                read-only
 STATUS                    current
 DESCRIPTION
  "The type of the mac address whether supplicant or non-supplicant."
 ::= { alaRedirectByodHostEntry 1 }

 alaByodHostStateSlotNumber   OBJECT-TYPE
 SYNTAX                       Integer32 (1..16)
 MAX-ACCESS                   read-only
 STATUS                       current
 DESCRIPTION
  "The slot Number."
 ::= { alaRedirectByodHostEntry 2 }

 alaByodHostStatePortNumber OBJECT-TYPE
 SYNTAX                     Integer32 (1..48)
 MAX-ACCESS                 read-only
 STATUS                     current
 DESCRIPTION
  "The port number."
 ::= { alaRedirectByodHostEntry 3 }

 alaByodHostStateMacAddress OBJECT-TYPE
 SYNTAX                     MacAddress
 MAX-ACCESS                 read-only
 STATUS                     current
 DESCRIPTION
   "The Client MAc Address which is Index."
 ::= { alaRedirectByodHostEntry 4 }

 alaByodHostStateDeviceType OBJECT-TYPE
 SYNTAX                     ALADot1xDeviceType 
 MAX-ACCESS                 read-only    
 STATUS                     current 
 DESCRIPTION
  "To find the device either supplicant or non-supplicnat."
 ::= { alaRedirectByodHostEntry 5 }

 alaByodHostProgressStatus OBJECT-TYPE
 SYNTAX                    SnmpAdminString ( SIZE( 0 .. 31 ) )
 MAX-ACCESS                read-only
 STATUS                    current 
 DESCRIPTION
  "The status of the BYOD Host."
 ::= { alaRedirectByodHostEntry 6 }

 alaRedirectByodHostUnpTable OBJECT-TYPE
 SYNTAX            SEQUENCE OF AlaRedirectByodHostUnpEntry
 MAX-ACCESS        not-accessible
 STATUS            current
 DESCRIPTION
   "This table shows list of BYOD Hosts with restricted and new UNP status."
 ::= { alaIND1Dot1XMIBObjects 15 }

 alaRedirectByodHostUnpEntry  OBJECT-TYPE
 SYNTAX                       AlaRedirectByodHostUnpEntry
 MAX-ACCESS             not-accessible
 STATUS                 current  
 DESCRIPTION
  "BYOD Client UNP information."
 INDEX { alaByodClientMacQueryType,
         alaByodClientSlotNumber,
         alaByodClientPortNumber,  
         alaByodClientMacAddress,
         alaByodClientDeviceType }
 ::= { alaRedirectByodHostUnpTable 1 }

 AlaRedirectByodHostUnpEntry ::= SEQUENCE
 {
   alaByodClientMacQueryType ALADot1xMacQueryType,
   alaByodClientSlotNumber  Integer32,
   alaByodClientPortNumber  Integer32,
   alaByodClientMacAddress  MacAddress,
   alaByodClientDeviceType  ALADot1xDeviceType,
   alaByodPreviousUNP       SnmpAdminString, 
   alaByodNewUNP            SnmpAdminString,
   alaByodCOAStatus         SnmpAdminString
 }

 alaByodClientMacQueryType  OBJECT-TYPE
 SYNTAX                     ALADot1xMacQueryType
 MAX-ACCESS                 read-only
 STATUS                     current
 DESCRIPTION
  "The type of MAC address whether supplicant or non-supplicant."
 ::= { alaRedirectByodHostUnpEntry 1 }

 alaByodClientSlotNumber  OBJECT-TYPE
 SYNTAX                   Integer32 (1..16)
 MAX-ACCESS               read-only
 STATUS                   current
 DESCRIPTION
   "The slot number."
 ::= { alaRedirectByodHostUnpEntry 2 }
    
 alaByodClientPortNumber  OBJECT-TYPE
 SYNTAX                   Integer32 (1..48)
 MAX-ACCESS               read-only
 STATUS                   current
 DESCRIPTION
   "The port  number."
 ::= { alaRedirectByodHostUnpEntry 3 }
 
alaByodClientMacAddress OBJECT-TYPE
 SYNTAX                  MacAddress
 MAX-ACCESS              read-only 
 STATUS                  current
 DESCRIPTION
  "The Client MAc Address which is Index."
 ::= { alaRedirectByodHostUnpEntry 4 }

 alaByodClientDeviceType  OBJECT-TYPE
 SYNTAX                   ALADot1xDeviceType
 MAX-ACCESS               read-only
 STATUS                   current
 DESCRIPTION
  "To find the device either supplicant or non-supplicnat."
 ::= { alaRedirectByodHostUnpEntry 5 }

 alaByodPreviousUNP       OBJECT-TYPE
 SYNTAX                   SnmpAdminString ( SIZE( 0 .. 31 ) )
 MAX-ACCESS               read-only
 STATUS                   current
 DESCRIPTION
   "The UNP assigned to the clinet when BYOD is in progress."
 ::= { alaRedirectByodHostUnpEntry 6 }

 alaByodNewUNP            OBJECT-TYPE
 SYNTAX                   SnmpAdminString ( SIZE( 0 .. 31 ) )
 MAX-ACCESS               read-only
 STATUS                   current
 DESCRIPTION
   "The redirect UNP assigned to client once bYOD complete."
 ::= { alaRedirectByodHostUnpEntry 7 }

 alaByodCOAStatus       OBJECT-TYPE
 SYNTAX                 SnmpAdminString ( SIZE( 0 .. 31 ) )
 MAX-ACCESS             read-only
 STATUS                 current
 DESCRIPTION
  "BYOD status of each BYOD Host."
 ::= { alaRedirectByodHostUnpEntry 8 }
 
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    alaIND1Dot1XMIBCompliances MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
            "Compliance statement for Alcatel 802.1x."
        MODULE
            MANDATORY-GROUPS
            {
                --alaINDDot1XPortGroup,
                alaDot1xPortLookupGroup,
                alaINDDot1XPolicyGroup,
                alaINDDot1XDeviceStatusGroup,
                alaDot1xAuthSvrTimeoutGroup,
				alaPassthroughConfigGroup ,
				alaDot1xAdminLogoutParamsGroup,
				alaDot1xNonSupplicantEntryGroup,
				alaDot1xCportalConfigGroup,
				alaDot1xMacEntryGroup,
                alaKerberosPortGroup,
                alaDot1xCrlUnpStatusGroup,
				alaINDDot1XRedirectByodHostGroup,
				alaINDDot1XRedirectByodHostUnpGroup
            }

        ::= { alaIND1Dot1XMIBConformance 2 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

    --alaINDDot1XPortGroup OBJECT-GROUP
    --    OBJECTS
    --    {
    --        alaDot1xPortSlotNumber,
    --        alaDot1xPortPortNumber,
    --        alaDot1xPortMACAddress,
    --        alaDot1xPortVlan,
    --        alaDot1xPortProtocol,
    --        alaDot1xPortUserName,
    --        alaDot1xPortState,
    --        alaDot1xSupplicantPolicyUsed,
    -- 	      alaDot1xAuthFailReason,
    -- 	      alaDot1xReAuthCount,
    -- 	      alaDot1xLastSuccessTime
    --    }
    --    STATUS  current
    --    DESCRIPTION
    --        "Collection of 802.1x objects for port status."
    --    ::= { alaIND1Dot1XMIBGroups 1 }


    alaDot1xPortLookupGroup OBJECT-GROUP
        OBJECTS
        {
            alaDot1xPortLookupSlotNumber,
            alaDot1xPortLookupPortNumber,
            alaDot1xPortLookupMACAddress,
            alaDot1xPortLookupInterfaceNumber
        }
        STATUS  current
        DESCRIPTION
            "Collection of 802.1x objects for port lookup."
        ::= { alaIND1Dot1XMIBGroups 2 }

    alaINDDot1XPolicyGroup OBJECT-GROUP
        OBJECTS
        {
            alaDot1xNonSuppPolicy,
	    alaDot1xSuppPolicy,
            alaDot1xPollingCnt,
	    alaDot1xCaptivePortalPolicy,
            alaDot1xCPortalSessionLimit,
            alaDot1xCPortalRetryCnt,
            alaDot1xSupplicantBypass,
            alaDot1xSBAllowEAP,
            alaDot1xCPortalInactivityLogout
        }
        STATUS  current
        DESCRIPTION
            "Collection of 802.1x objects for supplicant and non-supplicant policies."
        ::= { alaIND1Dot1XMIBGroups 3 }


    alaINDDot1XDeviceStatusGroup OBJECT-GROUP
        OBJECTS
        {
            alaDot1xDeviceStatusVlan,
            alaDot1xDeviceStatusIPAddress,
            alaDot1xDeviceStatusUserName,
            alaDot1xDeviceStatusProfileUsed,
            alaDot1xDeviceStatusAuthType,
            alaDot1xDeviceStatusPolicyUsed,
            alaDot1xDeviceStatusAuthResult,
            alaDot1xDeviceStatusMacLearntState,
            alaDot1xDeviceStatusTimeLearned,
            alaDot1xDeviceStatusCaptivePortalUsed,
	    alaDot1xDeviceStatusHicResult
        }
        STATUS  current
        DESCRIPTION
            "Collection of 802.1x objects for the status of the devices on an 802.1X enable port."
        ::= { alaIND1Dot1XMIBGroups 4 }

    alaDot1xAuthSvrTimeoutGroup OBJECT-GROUP
        OBJECTS
        {
            alaDot1xAuthSvrTimeoutPolicy,
            alaDot1xAuthSvrTimeoutReAuthPeriod,
            alaDot1xAuthSvrTimeoutStatus,
            alaDot1xAuthSvrTimeoutVoicePolicy,
            alaDot1xAuthSvrPollingStatus,
            alaDot1xAuthSvrDownMacPersistency,
 	    alaDot1xDelayLearningPeriod,
	    alaDot1xAPModeStatus,
	    alaDot1xEAPVersionStatus,
            alaDot1xForceL3Learning,
            alaDot1xForceL3LearningPortBounce 
        }
        STATUS  current
        DESCRIPTION
            "Collection of 802.1x objects for the Authentication Server Timeout."
        ::= { alaIND1Dot1XMIBGroups 5 }

    alaPassthroughConfigGroup OBJECT-GROUP
        OBJECTS
        {
            alaDot1xPassthroughStatus,
            alaAvlanPassthroughStatus,
            alaCportalPassthroughStatus
        }
        STATUS current
        DESCRIPTION
            " Status of passthrough for 802.1x and avlan configuration in devices."
        ::= { alaIND1Dot1XMIBGroups 6 }

	alaDot1xAdminLogoutParamsGroup OBJECT-GROUP
        OBJECTS
        {
        	alaDot1xAdminLogoutType,
            alaDot1xAdminLogoutMacAddress,
            alaDot1xAdminLogoutUserName,
            alaDot1xAdminLogoutNetworkProfileName,
            alaDot1xAdminLogoutInterfaceId

        }
        STATUS current
        DESCRIPTION
            "Dot1x Admin Logout Parameters group."
        ::= { alaIND1Dot1XMIBGroups 7 }

        alaDot1xNonSupplicantEntryGroup OBJECT-GROUP
        OBJECTS
        {
        	alaDot1xNonSupplicantIntfNum,
        	alaDot1xNonSupplicantMACAddress,
        	alaDot1xNonSupplicantVlanID,
        	alaDot1xNonSupplicantPolicyUsed,
        	alaDot1xAuthenticationStatus,
        	alaDot1xNonSupplicantHicEnabledMAC
        }
        STATUS current
        DESCRIPTION
            "non 802.1x supplicants learned on 802.1x authenticated ports."
        ::= { alaIND1Dot1XMIBGroups 8 }
		
		alaDot1xCportalConfigGroup OBJECT-GROUP
        OBJECTS
        {
                alaDot1xCPortalIpAddress,
                alaDot1xCPortalProxyURL,
        	    alaDot1xCPortalPostAuthSuccessRedirectURL,
        	    alaDot1xCPortalPostAuthFailRedirectURL,
        	    alaDot1xCPortalDNSKeyword1,
        	    alaDot1xCPortalDNSKeyword2,
        	    alaDot1xCPortalDNSKeyword3,
        	    alaDot1xCPortalDNSKeyword4,
        	    alaDot1xCPortalProxyPort,
        	    alaDot1xCPortalRedirectString
        	
        }
        STATUS current
        DESCRIPTION
            "Captive portal Config Group."
        ::= { alaIND1Dot1XMIBGroups 9 }

        alaDot1xMacEntryGroup OBJECT-GROUP
        OBJECTS
        {
        	alaDot1xMacIfIndex ,
           alaDot1xHicEnabledMAC ,
           alaDot1xMacSlotNumber,
           alaDot1xMacPortNumber,
           alaDot1xMacVlan,
          alaDot1xMacProtocol,
          alaDot1xMacUserName  ,
          alaDot1xMacState ,
          alaDot1xMacSupplicantPolicyUsed

        }
        STATUS current
        DESCRIPTION
            "Captive portal Config Group."
        ::= { alaIND1Dot1XMIBGroups 10 }

        alaKerberosPortGroup   OBJECT-GROUP
        OBJECTS
        {
           alaKerberosPortStatus
        }
        STATUS current
        DESCRIPTION
            "Kerberos Snooping Config Group."
        ::= { alaIND1Dot1XMIBGroups 11 }

     alaDot1xCrlUnpStatusGroup OBJECT-GROUP
        OBJECTS
        {
            alaDot1xCrlIngBw,
            alaDot1xCrlEgrBw,
            alaDot1xCrlIngTypeFlag,
            alaDot1xCrlEgrTypeFlag,
            alaDot1xCrlDefDepth,
            alaDot1xCrlIngProfile,
            alaDot1xCrlEgrProfile
        }
        STATUS current
        DESCRIPTION
            " Status of Current Ingress and Egress BW rate limitation present on 8021x port."
        ::= { alaIND1Dot1XMIBGroups 12 }
    
	alaINDDot1XRedirectByodHostGroup   OBJECT-GROUP
      OBJECTS
        {
          alaByodHostProgressStatus
        }
      STATUS  current
      DESCRIPTION
        "Collection of BYOD clients and its status."
      ::= { alaIND1Dot1XMIBGroups 13 }
      
      alaINDDot1XRedirectByodHostUnpGroup OBJECT-GROUP
        OBJECTS
        {
          alaByodPreviousUNP,
          alaByodNewUNP,
          alaByodCOAStatus
        }
        STATUS  current
        DESCRIPTION
         "Collection of BYOD clients UNP and BYOD status."
        ::= { alaIND1Dot1XMIBGroups 14 } 
		
        END

