Legrand / Raritan / Server Technology Xerus™ JSON-RPC API
Loading...
Searching...
No Matches
pdumodel::ResidualCurrentStateSensor Interface Reference

Residual current state sensor interface. More...

import <ResidualCurrentStateSensor.idl;

Inheritance diagram for pdumodel::ResidualCurrentStateSensor:
sensors::StateSensor sensors::Sensor

Public Member Functions

int startSelfTest ()
 Start a self test of the residual current monitor.
 
- Public Member Functions inherited from sensors::StateSensor
State getState ()
 Get the sensor state.
 
- Public Member Functions inherited from sensors::Sensor
TypeSpec getTypeSpec ()
 Retrieve the sensor type specification.
 
boolean isTypeChangeAllowed ()
 Check whether the sensor type can be changed using setType().
 
int setType (in int type, in int unit)
 Set sensor type and unit.
 

Public Attributes

constant int STATE_NORMAL = 0
 Possible sensor state values.
 
constant int STATE_WARNING = 1
 Residual current sensor detected overcurrent.
 
constant int STATE_CRITICAL = 2
 Residual current sensor detected overcurrent.
 
constant int STATE_SELFTEST = 3
 Residual current sensor currently conducts a self test.
 
constant int STATE_FAILURE = 4
 Residual current sensor is unavailable or self test failed.
 
- Public Attributes inherited from sensors::Sensor
constant int ERR_NOT_SUPPORTED = 1
 The operation is not supported.
 
constant int NUMERIC = 0
 Sensor reading type
 
constant int DISCRETE_ON_OFF = 1
 Sensor has two discrete readings: 0 (off) and 1 (on), see OnOffState
 
constant int DISCRETE_MULTI = 2
 Sensor has multiple discrete readings
 
constant int UNSPECIFIED = 0
 Sensor type
 
constant int VOLTAGE = 1
 Voltage.
 
constant int CURRENT = 2
 Current.
 
constant int UNBALANCE_CURRENT = 3
 Current unbalance.
 
constant int POWER = 4
 Power.
 
constant int POWER_FACTOR = 5
 Power factor.
 
constant int ENERGY = 6
 Energy.
 
constant int FREQUENCY = 7
 Frequency.
 
constant int TEMPERATURE = 8
 Temperature.
 
constant int HUMIDITY = 9
 Relative humidity.
 
constant int AIR_FLOW = 10
 Air flow.
 
constant int AIR_PRESSURE = 11
 Air pressure.
 
constant int CONTACT_CLOSURE = 12
 Contact Closure [uses NormalAlarmedState mapping].
 
constant int ON_OFF_SENSOR = 13
 Switch state [uses OnOffState mapping].
 
constant int TRIP_SENSOR = 14
 Circuit breaker tripped [uses OpenClosedState mapping].
 
constant int VIBRATION = 15
 Vibration [uses NormalAlarmedState mapping].
 
constant int WATER_LEAK = 16
 Water leak [uses NormalAlarmedState mapping].
 
constant int SMOKE_DETECTOR = 17
 Smoke detector [uses NormalAlarmedState mapping].
 
constant int TOTAL_HARMONIC_DISTORTION = 18
 Total harmonic distortion.
 
constant int MASS = 19
 Mass.
 
constant int ELECTRICAL_RESISTANCE = 20
 Electrical resistance.
 
constant int FLUX = 21
 Flux (mass per time, e.g. water flow)
 
constant int LUMINOUS_INTENSITY = 22
 Luminous intensity.
 
constant int ACCELERATION = 23
 Acceleration.
 
constant int MAGNETIC_FLUX_DENSITY = 24
 Magnetic flux density.
 
constant int ELECTRIC_FIELD_STRENGTH = 25
 Electric field strength.
 
constant int MAGNETIC_FIELD_STRENGTH = 26
 Magnetic field strength [uses NormelAlarmedState mapping if of DISCRETE_ON_OFF type].
 
constant int ANGLE = 27
 Angle (e.g. phase angle)
 
constant int SELECTION = 28
 Selected index (one of n)
 
constant int FAULT_STATE = 29
 Fault state [uses NormalAlarmedState mapping if of DISCRETE_ON_OFF type].
 
constant int POWER_QUALITY = 30
 Power quality.
 
constant int ROTATIONAL_SPEED = 31
 Rotational speed (e.g. fan speed)
 
constant int LUMINOUS_ENERGY = 32
 Luminous energy.
 
constant int LUMINOUS_FLUX = 33
 Luminous flux.
 
constant int ILLUMINANCE = 34
 Illuminance used for light incident on a surface.
 
constant int LUMINOUS_EMITTANCE = 35
 Luminous emittance used for light emitted from a surface.
 
constant int MOTION = 36
 Motion detection.
 
constant int OCCUPANCY = 37
 Occupancy detection [uses NormalAlarmedState mapping].
 
constant int TAMPER = 38
 Tamper detection [uses NormalAlarmedState mapping].
 
constant int DRY_CONTACT = 39
 Dry contact (actuator) [uses OnOffState mapping].
 
constant int POWERED_DRY_CONTACT = 40
 Powered dry contact (actuator) [uses OnOffState mapping].
 
constant int ABSOLUTE_HUMIDITY = 41
 Absolute humidity.
 
constant int DOOR_STATE = 42
 Door state [uses OpenClosedState mapping].
 
constant int DOOR_LOCK_STATE = 43
 Door lock state [uses OpenClosedState mapping].
 
constant int DOOR_HANDLE_LOCK = 44
 Door handle switch [uses OpenClosedState mapping].
 
constant int CREST_FACTOR = 45
 Crest factor.
 
constant int DISTANCE = 46
 Distance.
 
constant int LENGTH = 47
 Length.
 
constant int UNBALANCE_VOLTAGE = 48
 Voltage unbalance.
 
constant int PARTICLE_DENSITY = 49
 Particle Density.
 
constant int DEW_POINT = 50
 Dew Point.
 
constant int ELECTRICAL_IMPEDANCE = 51
 Electrical impedance.
 
constant int TS_BYPASS_STATE = 52
 Transfer switch bypass state.
 
constant int BATTERY_LEVEL = 53
 Battery level.
 
constant int NONE = 0
 Sensor unit
 
constant int VOLT = 1
 Electric Potential, Volts (V)
 
constant int AMPERE = 2
 Electric Current, Amperes (A)
 
constant int WATT = 3
 Electric Power, Watts (W)
 
constant int VOLT_AMP = 4
 Electric Capacity, Volt Amperes (VA)
 
constant int WATT_HOUR = 5
 Active Energy, Watt hours (Wh)
 
constant int VOLT_AMP_HOUR = 6
 Apparent Energy, Volt-Ampere hours (VAh)
 
constant int DEGREE_CELSIUS = 7
 Temperature, Celsius (deg C)
 
constant int HZ = 8
 Frequency, Hertz (Hz)
 
constant int PERCENT = 9
 Ratio, Percent (%)
 
constant int METER_PER_SEC = 10
 Speed, Meters per second (m/s)
 
constant int PASCAL = 11
 Pressure, Pascal (Pa)
 
constant int G = 12
 Acceleration, G-force (g)
 
constant int RPM = 13
 Rotation, Revolutions per minute (rpm)
 
constant int METER = 14
 Distance, Meters (m)
 
constant int HOUR = 15
 Time, Hours (h)
 
constant int MINUTE = 16
 Time, Minutes (min)
 
constant int SECOND = 17
 Time, Seconds (s)
 
constant int VOLT_AMP_REACTIVE = 18
 Reactive Power, Volt Amperes reactive (var)
 
constant int VOLT_AMP_REACTIVE_HOUR = 19
 Reactive Energy, Volt Ampere reactive hours (varh)
 
constant int GRAM = 20
 Mass, Gram (g)
 
constant int OHM = 21
 Resistance, Ohm (omega, R)
 
constant int LITERS_PER_HOUR = 22
 Flow, Liters per hour (l/h)
 
constant int CANDELA = 23
 Luminous Intensity, Candela (cd)
 
constant int METER_PER_SQUARE_SEC = 24
 Acceleration, Meter per square second (m/s^2)
 
constant int METER_PER_SQARE_SEC = 24
 Typo, preserved for backward compatibility.
 
constant int TESLA = 25
 Magnetic Flux Density, Tesla (T)
 
constant int VOLT_PER_METER = 26
 Electric Field, Volt per meter (V/m)
 
constant int VOLT_PER_AMPERE = 27
 Resistance, Volt per ampere (V/A)
 
constant int DEGREE = 28
 Angle, Degrees (deg)
 
constant int DEGREE_FAHRENHEIT = 29
 Temperature, Fahrenheit (deg F)
 
constant int KELVIN = 30
 Temperature, Kelvin (K)
 
constant int JOULE = 31
 Energy, Joules (J)
 
constant int COULOMB = 32
 Electric Charge, Coulombs (C)
 
constant int NIT = 33
 Luminance, Nits (cd/m^2)
 
constant int LUMEN = 34
 Luminous Flux, Lumen (lm)
 
constant int LUMEN_SECOND = 35
 Luminous Energy, Lumen second (lm s)
 
constant int LUX = 36
 Luminous Flux, Lux (lx)
 
constant int PSI = 37
 Pressure, Pounds per square inch (psi)
 
constant int NEWTON = 38
 Force, Newtons (N, J/m)
 
constant int FOOT = 39
 Distance, Feet (ft)
 
constant int FOOT_PER_SEC = 40
 Speed, Feet per second (ft/s)
 
constant int CUBIC_METER = 41
 Volume, Cubic meters (m^3)
 
constant int RADIANT = 42
 Angle, Radians (rad)
 
constant int STERADIANT = 43
 Solid Angle, Steradians (sr)
 
constant int HENRY = 44
 Inductance, Henries (H, Vs/A, Ohm s)
 
constant int FARAD = 45
 Capacitance, Farads (F)
 
constant int MOL = 46
 Substance Quantity, Moles (mol)
 
constant int BECQUEREL = 47
 Radiation, Becquerels (Bq)
 
constant int GRAY = 48
 Radiation, Grays (Gy, J/kg)
 
constant int SIEVERT = 49
 Radiation, Sieverts (Sv = J/kg)
 
constant int G_PER_CUBIC_METER = 50
 Density, Grams per cubic meter (g/m^3)
 
constant int UG_PER_CUBIC_METER = 51
 Density, Micrograms per cubic meter (µg/m^3)
 

Additional Inherited Members

- Public Types inherited from sensors::Sensor
enum  OnOffState { OFF , ON }
 Sensor states for DISCRETE_ON_OFF sensors. More...
 
enum  OpenClosedState { OPEN , CLOSED }
 
enum  NormalAlarmedState { NORMAL , ALARMED }
 
enum  OkFaultState { OK , FAULT }
 

Detailed Description

Residual current state sensor interface.

Definition at line 17 of file ResidualCurrentStateSensor.idl.

Member Function Documentation

◆ startSelfTest()

int pdumodel::ResidualCurrentStateSensor::startSelfTest ( )

Start a self test of the residual current monitor.

Returns
0 if OK
1 if no residual current monitor is present
2 if a self test is already running

Member Data Documentation

◆ STATE_CRITICAL

constant int pdumodel::ResidualCurrentStateSensor::STATE_CRITICAL = 2

Residual current sensor detected overcurrent.

Definition at line 22 of file ResidualCurrentStateSensor.idl.

◆ STATE_FAILURE

constant int pdumodel::ResidualCurrentStateSensor::STATE_FAILURE = 4

Residual current sensor is unavailable or self test failed.

Definition at line 24 of file ResidualCurrentStateSensor.idl.

◆ STATE_NORMAL

constant int pdumodel::ResidualCurrentStateSensor::STATE_NORMAL = 0

Possible sensor state values.

Residual current sensor is operating normally

Definition at line 20 of file ResidualCurrentStateSensor.idl.

◆ STATE_SELFTEST

constant int pdumodel::ResidualCurrentStateSensor::STATE_SELFTEST = 3

Residual current sensor currently conducts a self test.

Definition at line 23 of file ResidualCurrentStateSensor.idl.

◆ STATE_WARNING

constant int pdumodel::ResidualCurrentStateSensor::STATE_WARNING = 1

Residual current sensor detected overcurrent.

Definition at line 21 of file ResidualCurrentStateSensor.idl.


The documentation for this interface was generated from the following file: